ENSONIQ OEX-6sr User Manual download pdf (Page 11)

OEX-6sr Operation Manual

Using the OEX-6sr with the ASR-lO/ASR-88

The ASR can route a single WaveSample, Layer, or

Instrument*Sequence Track to any of the OEX-6sr outputs. The

procedure for each is similar.

1) Setting up the ASR for use with an OEX-6sr.

Connect the OEX-6sr to an ASR using the instructions

in the previous sections.

Turn on the ASR.

2) Routing a

WaveSample

(Layer, Instrument-Sequence

Track) to an OEX-6sr Stereo Output (AUX 2).

Load an Instrument.

Select the Instrument.

Press Edit. This takes you to the Edit Context page,

and shows

the

following:

NAME OF INST

LYR=1

WS=ALL

This screen shows whether an Instrument, Layer, or

WaveSample is selected for editing. The selection is

underlined. Since we would like to edit an individual

WaveSample, scroll (using the Left/Right Arrow

buttons) to underline WS=ALL. The screen should

now look like this:

NAME OF INST LYR=1 WS=ALL

Now select the WaveSample that you would like to

route to the OEX-6sr by either pressing the key on the

keyboard that the

WaveSample

is assigned to, or by

editing (using the Up/Down Arrows buttons or the Data

Entry Slider) to the desired

WaveSample

number.

Let’s assume we are editing/routing WaveSample 16.

The display should now look like this:

NAME OF INST LYR=

WS=l6

Press Edit, then Amp. This page shows you the output

parameters for the instrument, layer, or in this case, the

WaveSample.

Scroll through the different parameters

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Comments to this Manuals

No comments

ENSONIQ OEX-6sr User Manual Page 11

Comments to this Manuals