ENSONIQ DP/2 Specifications download pdf (Page 137)

Section 5 — Storage

2 ENSONIQ DP/4+ Reference Manual

Section 5 — Storage

The storage functions on the DP/4+ enable you to:

• copy 1U, 2U, 4U, or Config Presets internally to other locations,

• write (save) edited preset information, and

• transmit dumps via MIDI system exclusive messages.

Presets may also be manually transcribed using the Preset Parameter Worksheet preset found at

the end of this chapter, and also at the end of this manual.

Internal Storage

The Preset Memory Protect Switch

Before you can copy or write presets, the Preset Memory Protect switch must be set to the “Off”

position. If it is not set to “Off” before trying to write or copy a preset, the display will read

“MEMORY PROTECTED.”

To set the Preset Memory Protect Switch:

1. Press the {SYSTEM"MIDI} button.

2. Use the {<} and {>} buttons to scroll until the display shows:

Preset Memory

Protect=On

Tip: There is a quick way to get to this display. The System•MIDI parameters are

divided into sub-groups. By pressing the {SYSTEM"MIDI} button several times, you

can quickly scroll through the sub-groups. Parameter 54 is the first page of one of these

sub-groups.

3. If the word “On” is flashing, move the Data Entry Knob counterclockwise to the “Off”

position. If the word “Off” is flashing, RAM preset data can be changed.

4. Once this switch has been set to the “Off” position, you can save your preset. Press the

{EDIT} button to return to Edit mode. Your newly edited preset should still be intact and

ready to save.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 198 199

No comments

ENSONIQ DP/2 Specifications Page 137