Part # 9310 0188 01 - A Model # MM-87
Instant Karaoke
Vocal Remover
Config Preset 56
0276
E
EF
02765 762765
EF
The DP/2 can remove the lead vocals from many recordings, allowing you to step right in as the lead singer. This Quick-Start
shows how to do it.
1. Turn the DP/2 inputs and outputs knobs down all the way (counter-clockwise).
2. Connect the left and right cables from a stereo source (a mixer, cd or cassette player, or turntable, for example) into the
DP/2’s rear-panel Input 1 and 2 jacks.
3. Connect cables from the DP/2’s back-panel Output 1 and 2 jacks to two inputs on your mixing console or stereo guitar
amplifier. If you’re going into a single-input mixer or amp, connect a cable from the DP/2’s Output 1 to that input.
4. While playing the music you want to sing along with, turn the input 1 and 2 knobs clockwise until the red peak LEDs just
above input 1 is flashing occasionally.
5. Turn the outputs knob up until your mixer (or amp) is receiving the proper level from the DP/2.
6. Press the {SELECT} button, and then the {CONFIG} button. If the red LEDs in the {A}, {B}, {C} and {D} buttons light up,
press {CONFIG} again.
7. Use the data entry knob to dial in #56, Vocal Remover.
8. Press {SELECT} again.
9. Press the {EDIT} button.
10. Press the {A} button.
11. Press {>} until the “2000” in “Mid Fc=2000” is flashing. Turn the data entry knob up and down to find the best setting for
reducing the volume of the lead vocal. Small changes in this setting can be the key to success!
Note: If the vocal you’re trying to remove has been processed with reverb or other effects, it may not be possible
to remove it entirely.
Comments to this Manuals