ENSONIQ TS-10 Specifications download pdf (Page 179)

Section 9 — Program Parameters TS-10 Musician’s Manual

Mod Mixer Page

The Mod Mixer is a unique feature which allows you to:

• combine and assign two modulators to a single modulation input

• scale and/or shape the response of one of those modulators according to one of 16 Mod

Shaper Curves

Select the voice you want to edit on the Select Voice page, and then press Mod Mixer. The

display shows:

Mod Source 1 Mod Source 2

Mod Source 2

Scale Amoumt

Mod Source 2

Shaper Curve

The two parameters on the top line of the display select the two modulators which will be mixed

together, SRC-1 and SRC-2. On the lower line of the display are two parameters for shaping the

level and response of SRC-2. Internally, the Mixer/Shaper works like this:

This output is the

modulator called

MIXER, and can be

selected at any

modulation input.

Mod Source 1

Mod Source 2

Scale Shape

Mod Mixer/Shaper

Mixer

There are four parameters which can be selected on the Mod/Mixer page:

SRC-1 Range: various

Select any of the 15 available modulators (including the mixer itself) as Mod Source 1. SRC-1 is

sent directly to the mod mixer without any level change or response shaping.

SRC-2 Range: various

Select one of the 15 available modulators as Mod Source 2. Before being added to SRC-1, SRC-2’s

level is adjusted by a scale factor, and then it is passed through the shaper, which allows its

response to be customized in a number of interesting ways.

SRC-2 SCALE Range: various from 0.1 to 8.0

This is used to adjust the level of SRC-2 relative to SRC-1, or to simply scale the level of the

modulator for effect. The modulator’s level is multiplied by the number shown. A value of 1.0

leaves the modulator at its original level. Fractional values (0.1 to 0.9) will reduce the level.

Values greater than 1.0 will amplify the effect of the modulator, in most cases simply causing it to

reach full level much sooner.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 179