ENSONIQ TS-10 Specifications Page 228
- Page / 372
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Section 10 — Understanding the Sequencer TS-10 Musician’s Manual
34
If external sync is being used (CLOCK=MIDI), recording begins with the first clock received after
the MIDI Start command. If internal sync is selected (CLOCK=INT), then recording begins when
the first note is received.
Note: With the SQX-70 installed, the sequencer can record over 97,00 notes. However the sequencer
record buffer is of a limited size, and can only record 16, 00 notes at one time. As a result, you
may see an OUT OF MEMORY message if you exceed the size of the record buffer. (this is most
common in multi-track record). If this occurs, try editing the incoming data into several smaller
sequences; then, once recorded into the TS-10 sequencer, append them together.
Basic Multi-track Recording from an External Sequencer
The following procedure is the basic method for recording a multi-track sequence from an
external sequencer into the TS-10.
• Set MODE=MULTI on MIDI Control page.
• Set CLOCK=MIDI and REC-SOURCE=MULTI on the Sequencer Control page(s).
• Disable count-off on both systems to avoid problems.
• Disable sequence looping on the external sequencer.
• Create a new sequence with the correct time signature.
• Make sure that the external sequencer will send its track data on MIDI channels that the TS-10
is set up to receive (track MIDI channels 1..12 by default).
• Make sure that the external sequencer will send program changes at the start of each track to
automatically define the necessary tracks on the TS-10, or define them yourself on the TS-10
manually.
• Press Record to enter MIDI Record mode (MREC will be flashing indicating that the TS-10 is
waiting for MIDI Start and Clock messages).
• Start your external sequencer playing its sequence. When the external sequence stops, or
when you press Stop on the TS-10, the TS-10 will show “EDITING DATA...” for a time and
then display the Locate page.
• Set CLOCK=INT on the Sequencer Control page and press Play to hear what you have
recorded. You may then decide that the results are satisfactory, or if not, you can try again or
erase the sequence.
Recording into the Sequencer in a MIDI Loop
Use the following basic procdure if you want to record into the TS-10’s sequencer from its own
keyboardin a MIDI loop. You can record to a single track, or to multiple stacked tracks,
depending on which tracks are selected, and how you set the REC-SOURCE parameter on the
Sequencer Control page:
• Set MIDI-TRK-NAMES=ON on the System page.
• Set MODE=MULTI, LOOP=ON, START/STOP=OFF and PROG-CHG=OFF all on the MIDI
Control pages.
• Set REC-SOURCE=MIDI (to record onto a single track with Audition) or REC-
SOURCE=MULTI (to record onto multiple stacked tracks with no Audition) on the Sequencer
Control page.
• Enter Seqs/Songs mode and create a new Sequence. Select and define all 12 tracks.
• Set the Track STAT (Status) to MIDI-LOOP for all 12 tracks.
• Set each of the tracks to a discrete MIDI channel (we recommend assigning tracks 1-12 to MIDI
channels 1-12 to avoid confusion).
• Connect the MIDI Out jack of the TS-10 to the MIDI In jack of the TS-10 with a single MIDI
cable.
• Select or stack the track(s) that you want to record on. Playing the keyboard will transmit out
the MIDI Out jack, back in the MIDI In jack, and will play the sounds that are assigned to the
selected and stacked tracks.
• Enter record as usual. If REC-SOURCE=MIDI, data will only be recorded on the primary
- Musician’s Manual 1
- Version 3.0 1
- List Of Tips 4
- Welcome! 6
- Temperature Guidelines 10
- Amplification 10
- Don’t’s: 12
- Reinitializing the TS-10 13
- Need More Help? 14
- Table of Contents 16
- List of Tips 16
- Table of Contents - 4 19
- Section 7 — Effect Parameters 20
- Section 13 — Storage 27
- Appendix 30
- TS-10 Index 30
- Rear Panel Connections 31
- Control Voltage Foot Pedal 32
- Front Panel Controls 33
- Parametric Programming 35
- Sub-pages 35
- Changing a Parameter 35
- Performance Controllers 36
- Pressure (After-touch) 37
- Playing Sounds and Presets 38
- Using the BankSet Button 39
- Selecting a Preset 39
- Selecting a Sound 39
- The SoundFinder™ Feature 40
- Understanding Tracks 42
- Selecting ROM Pitch-Tables 51
- Working with MIDI Loops 58
- Using Presets with MIDI Loops 58
- What is a Preset? 61
- Selecting Presets 61
- Preset Effect 62
- Editing a Preset 63
- Saving a Preset 64
- Sampled Sound BankSets 65
- Replacing a Sound in a Preset 66
- Display Location 68
- Cellos Flute 75
- Latching Patch Selects 81
- Understanding TS-10 Effects 88
- Preset Effects 88
- Sequencer Effect 89
- Selecting Effects 89
- 02 EQ- -DDL+CHORUS+REV 99
- 03 DELAYLFO+CHORUS+REV 100
- 04 ROTOSPKR+CHORUS+REV 100
- 05 DISTORT+CHORUS+REV 102
- 06 PARAM EQ+CHORUS+REV 103
- 07 ENV VCF+CHORUS+REV 103
- 08 DDL+PHLANGR+REV 104
- 09 EQ- -DDL+PHLANGR+REV 106
- 10 DELAYLFO+PHLANGR+REV 106
- 11 ROTOSPKR+PHLANGR+REV 107
- 12 DISTORT+PHLANGR+REV 107
- 13 PARAM EQ+PHLANGR+REV 107
- 14 ENV VCF+PHLANGR+REV 108
- 15 DDL+ROTOSPKR+REV 108
- 16 EQ- -DDL+ROTOSPKR+REV 110
- 17 DELAYLFO+ROTOSPKR+REV 110
- 18 ROTOSPKR+ROTOSPKR+REV 111
- 19 DISTORT+ROTOSPKR+REV 111
- 20 PARAM EQ+ROTOSPKR+REV 111
- 21 ENV VCF+ROTOSPKR+REV 112
- Dual Effects 112
- 22 PLATE + PLATE REVERBS 112
- 23 PARAMETRIC EQ + PLATE 113
- 24 SMALL PLATE REVERB 115
- 25 LARGE PLATE REVERB 1 115
- 26 LARGE PLATE REVERB 2 117
- 27 HALL REVERB 1 117
- 28 HALL REVERB 2 118
- 29 HALL REVERB 3 120
- What is a Program? 121
- Using the Edit Buffer 122
- Using the Select Voice Page 123
- Voices 2 and 3 are muted 124
- Voices 4, 5 and 6 are muted 124
- Voice 1 is soloed 124
- Using the Group Edit feature 125
- Programming the Patch Selects 125
- Voice Programming Pages 127
- TS-10 Voice 128
- Configuration 128
- Modulators 129
- Modulation Sources 130
- Wave Page 134
- Using the Copy Functions 137
- MAKE COPY 138
- Special Recall Functions 139
- Special Copy Operations 139
- About Pitch-Tables 143
- Editing a Custom Pitch-Table 144
- Removing a Custom Pitch-Table 145
- About Wave-Lists 149
- Editing a Wave-List 150
- Removing a Wave-List 151
- About Drum-Maps 152
- How to Create a Drum-Map 153
- Editing a Drum-Map 154
- Removing a Drum-Map 154
- LFO Page 156
- LFO Waveshapes 158
- ENV1, ENV2 and ENV3 Pages 159
- Pitch Page 164
- Pitch Mods Page 166
- Filters Page 167
- FILTER 1 Page 168
- FILTER 2 Page 170
- Output Page 170
- Mod Mixer Page 179
- = output 180
- Program Control Page 182
- Pitch-Table Editor Parameters 185
- Copy Pitch-Table Parameters 187
- Wave-List Editor Parameters 188
- Drum-Map Editor Parameters 190
- Copy Drum-Map Parameters 193
- Program Effects Page 194
- Select Voice Page 194
- Copy Page 194
- Write Program Page 194
- Compare Function 194
- Introduction 195
- Digital Sequencing 195
- What is a Sequence? 195
- What is a Song? 196
- Sequencer Status 197
- Sequencer Banks 197
- Selecting a Sequence or Song 198
- Playing Sequences and Songs 198
- Sequencer Tracks 199
- Important: 204
- Creating a New Sequence 205
- Creating a New Song 206
- Erasing All Sequencer Memory 206
- Recording a Sequence 206
- CNTF appears during 207
- “Punching In” on a Track 209
- The MIDI Connection 211
- MIDI Track Configuration 212
- Song Mode 218
- Song Tracks 220
- Sequencer Tempo Track 224
- Tempo Track Edit Functions 225
- Using Multi-Track Record 227
- Edit Song Page Parameters 231
- INFO Sub-Page 232
- EDIT STEPS Page 233
- Edit Sequence Page Parameters 235
- ADD BARS 237
- DELETE BARS 238
- Edit Track Page Parameters 239
- Quantize points: 243
- Q = Straight 243
- S = Swing 243
- 01 25 49 73 01 Clocks 243
- Using the Quantize Options 244
- 16th 16th 245
- TRANSPOSE 247
- EVENT-LIST 248
- Bar Beat Clock 251
- Click Page 254
- Sequencer Control Page 255
- Song only 259
- Locate Page 261
- Song Locate Page 263
- Edit Times in Song Mode 265
- Song Position Pointers 267
- MIDI Song Selects 267
- MIDI data 270
- MIDI Out 271
- MIDI OutMIDI In 271
- MIDI In 271
- MIDI Thru 271
- Delay Times/Tempo BPM Chart 274
- What is General MIDI? 276
- General MIDI Sound Map 278
- MIDI Out in General MIDI Mode 283
- TS-10 General MIDI Parameters 284
- General MIDI “Panic” button 285
- Program Change YES YES 0-127 290
- TS-10 Disk File Types 292
- File Banks 294
- TS-10 Disk Functions 294
- SAVE — Saving Data to Disk 298
- Naming with the Keyboard 299
- LOAD — Loading Data from Disk 301
- SCSI Option (read-only) 304
- Directories 306
- Direct-Macros™ 307
- MIDI SYS-EX 308
- What are System Exclusives? 311
- TS-10 Disk Messages 315
- Fatal Error Messages 316
- What is a Sampled Sound? 317
- Warning! 317
- Sampled Sound Configuration 318
- About WaveSamples 319
- Loading a Sampled Sound 319
- About Directories 320
- Sampled Sound OPTIONS page 323
- Lack of Memory Message 324
- About the Auto-Load Feature 324
- What is a Surrogate Program 330
- What is a Sample-Banks File 332
- Saving a Sample-Banks File 332
- FileType to be saved 333
- Loading Sample-Edits 336
- WaveSample Envelopes 344
- ENV1, ENV2, ENV3 Pages 345
- TS-10 Filters 350
- Filter 1 = 3 pole / Low-pass 351
- 4 pole / Low-pass 351
- Filter 2 = 1 pole / Low-pass 351
- Volume Mod Source Shaper Page 358
- Layer Page 359
- GLIDE MODES 360
- Version: 2.0 364
- Index TS-10 Musician’s Manual 366
- TS-10 Musician’s Manual Index 367
- Basic information 24 368
- Defined ii 368
- Working with 28 368
Related products and manuals for Synthesizer ENSONIQ TS-10
Synthesizer ENSONIQ TS-10 User's Guide
(26 pages)
(26 pages)
Synthesizer ENSONIQ TS-12 Specifications
(445 pages)
(445 pages)
Yamaha RX-V861 manuales
Manuales del propietario y guías del usuario para Receptores AV Yamaha RX-V861.
Ofrecemos 1 manuales en pdf Yamaha RX-V861 para descargar gratis por tipos de documentos: El manual del propietario
Comments to this Manuals