ENSONIQ TS-10 Specifications download pdf (Page 333)

TS-10 Musician’s Manual Section 14 — Understanding Sampled Sounds

Here’s how:

• Press Sounds.

• While holding down the BankSet button, press the Bank 8 button. This displays Sampled

Sound BankSet 8.

• Press each of the Bank buttons (0-9) and verify that for each Sampled Sound Bank, the bottom

center of the display shows the name of a Sampled Sound that you want to save with the

Sample-Banks file, or (*EMPTY-BANK*).

Note: If you have expansion SIMMs installed, after viewing BankSet 8, repeat the previous step for

BankSet 9. To select BankSet 9, press the BankSet button once.

• If you should find a Sampled Sound either loaded (muted or unmuted) or - -NOT LOADED- -

that you do not want to save with the Sample-Banks file, press the bottom right soft button

beneath OPTIONS.

• Press the bottom left soft button to *DELETE* the Sampled Sound. The display shows:

name of Sampled Sound to be deleted

location of Sampled Sound to be deleted

• Press the soft button above *YES*.

• Repeat these steps for all Sampled Sound Banks that contain Sampled Sounds that you do not

want to save with the Sample-Banks file.

• When you are sure that all Sampled Sounds that you do not want to save with the Sample-

Banks file are deleted, insert a formatted TS-10 floppy disk into the disk drive.

• Press Storage.

• Press the bottom center soft button beneath DISK.

• Press the bottom left soft button beneath SAVE. The display shows the Save File page:

FileType to be saved

amount of free blocks on the disk

• Use the Data Entry Controls to select TYPE=SAMPLE-BANKS.

• Press the soft button above *YES*.

• At this point you can use the Data Entry Controls and the LEFT and RIGHT CURSOR controls

to name the SAMPLE-BANKS file. When you’ve written a name for the file,

• Press the soft button above *YES*. The display momentarily shows SAVING <file name>,

then DISK COMMAND COMPLETED, then reverts back to the SAVE FILE page.

• You have just successfully saved a Sample-Banks file.

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 333