ENSONIQ TS-10 Specifications download pdf (Page 89)

Section 6 — Understanding Effects TS-10 Musician’s Manual

will send controller information to the effect. The remaining pages contain the effect parameters,

which are specific to the effect type. These effect parameter pages are described in Section 7 —

Effect Parameters.

Sequencer Effect

Like each of the presets in the TS-10, each sequence and song contains an effect and a complete

set of effect parameter values. The effect is present even if none of the tracks in the sequence are

routed through the effect (e.g. all tracks are sent to the DRY or AUX destination bus - see Section 5

— Preset/Track Parameters). This effect applies to all sequencer tracks (or their program voices)

which are routed to either the FX1 or FX2 destination bus.

The effect is saved with each sequence or song. It will remain unaffected until a new song or

sequence is selected, unless it is specifically edited. A special incoming MIDI program change

message may be used to load new effects into a sequence in MULTI mode (see Section 3 — MIDI

Control Page Parameters). The Copy function and a special mode of Copy Preset to Sequence can

be used to replace the Sequence effect.

The sequencer effect is displayed and edited by pressing the Track Effects button in the Track

Parameters section of the front panel, when the TS-10 is in Sequencer mode.

Selecting Effects

The first parameter of the Effects page is the effects selector. Changing this parameter causes a

new effect to be selected, which in turn changes the type of parameters that will be available on

the rest of the pages. Selecting a new effect algorithm will automatically set all of the effect

parameters to their default values for the new effect. The available effects algorithms are:

00 DRY/BYPASSED 25 LARGE PLATE REVERB 1 50 EQ- -CHORUS + EQ- -DDL

DDL+CHORUS+REV 26 LARGE PLATE REVERB 2 51 FLANGER + REVERB

EQ- -DDL+CHORUS+REV 27 HALL REVERB 1 52 EQ- -FLANGER + DELAY

DELAYLFO+CHORUS+REV 28 HALL REVERB 2 53 PHASER + REVERB

ROTOSPKR+CHORUS+REV 29 HALL REVERB 3 54 PHASER + DELAY

DISTORT+CHORUS+REV 30 SMALL ROOM REVERB 55 EQ- -TREMOLO + DELAY

PARAM EQ+CHORUS+REV 31 MEDIUM ROOM REVERB 56 EQ- -VIBRATO + DELAY

ENV VCF+CHORUS+REV 32 LARGE ROOM REVERB 57 PITCH SHIFTER

DDL+PHLANGR+REV 33 TIGHT AMBIENCE 58 FAST PITCH SHIFTER

EQ- -DDL+PHLANGR+REV 34 WIDE AMBIENCE 59 PITCH SHIFTER + DELAY

DELAYLFO+PHLANGR+REV 35 NONLINEAR REVERB 1 60 ROTARY SPEAKER + REV

ROTOSPKR+PHLANGR+REV 36 NONLINEAR REVERB 2 61 SPEAKER CABINET

DISTORT+PHLANGR+REV 37 NONLINEAR REVERB 3 62 TUNABLE SPEAKER

PARAM EQ+PHLANGR+REV 38 GATED REVERB 63 GUITAR AMP 1

ENV VCF+PHLANGR+REV 39 REVERSE REVERB 1 64 GUITAR AMP 2

DDL+ROTOSPKR+REV 40 REVERSE REVERB 2 65 GUITAR AMP 3

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 89