ENSONIQ TS-10 Specifications download pdf (Page 209)

TS-10 Musician’s Manual Section 10 — Understanding the Sequencer

“Punching In” on a Track

The TS-10 offers two methods for “punching in” (or re-recording) a specific part of a track. When

AUTOPUNCH=OFF (on either the Locate or Sequencer Control sub-page), you can punch in

manually just by playing the keyboard to start recording. When AUTOPUNCH=ON, the TS-10

will enter and exit Record mode automatically at the precise times that you specify on the Locate

sub-page.

To Punch in manually on a track (meaning AUTOPUNCH=OFF on the Locate page):

• Press Seq/Song Tracks 1-6 or 7-12 and select the track you want to record on.

• Press Play to start the sequence or song playing.

• Press Record. This puts the TS-10 in Overdub Standby — ODUB flashes in the lower left

corner of the display and the sequencer is waiting for you to play keys before going into

record.

• Start playing at the point where you want to punch in. As soon as you play anything the TS-

10 goes into overdub (or record for a new track) and records what you play, leaving intact the

part of the track before the punch in. Unless you then press Stop/Continue or the assigned

AUX Foot Switch, new track data will be recorded from the point where you punched in to the

end of the sequence or song.

• Press Stop/Continue. You will see the Audition page as shown earlier, letting you audition

the new or the old track before deciding which to keep.

To Punch in and out automatically on a track (meaning AUTOPUNCH=ON):

• Set the Edit IN and OUT times on the Locate sub-page as described earlier in this section.

These define the exact bar, beat and clock at which the TS-10 will enter and exit record.

• Press Record/Play to start the sequencer. It will begin to play but will not go into record until

the Edit IN time is reached. You can play along with the sequence if you wish without being

recorded.

• When the Edit IN time is reached the sequencer will automatically enter record, and will

record whatever you play until the Edit OUT time is reached.

• At the Edit OUT time the sequencer automatically exits record and goes into Audition Play

mode.

• Audition the new track as usual from the Audition page before deciding whether to keep the

new or the old track.

When AUTOPUNCH=ON, the TS-10 will record events only within the window of time specified

by the Edit times, no matter how you enter record. Thus if you press Play, then Record the TS-10

will wait for you to play before entering record, but recording will only be triggered by notes

within the Edit times window. Notes played before the Edit IN time or after the Edit OUT time

will not initiate recording.

If the RECORD MODE=LOOPED (on the Sequencer Control page) and AUTOPUNCH=ON, the

sequencer will continue to go in and out of record at the Edit points each time the sequence

repeats, for as long as you let it play.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 209