ENSONIQ TS-10 Specifications download pdf (Page 358)

Section 15 — Sampled Sound Parameters TS-10 Musician’s Manual

Volume Mod Source Shaper Page

Press the Mod Mixer button. The VOL MODSRC SHAPER page is displayed.

A - B FADE-IN - TO Range: 0 to 127

C - D FADE-OUT - TO Range: 0 to 127

The volume modulator cross fade breakpoints (A and B, C and D) allow you to scale the effect of

the volume modulator (selected on the Output page MODSRC parameter) to create keyboard,

velocity, or other types of cross fades. Using the cross fade breakpoints, you can customize how

the volume modulator will affect the volume of the WaveSample across the range (or throw) of

its output. This lets you use velocity, keyboard position, pressure or any other modulator to

cross fade between WaveSamples.

Think of the A-B FADE-IN/C-D FADE-OUT parameters as a trapezoid, whose shape will affect

the output of the modulator assigned to the Output page MODSRC parameter. The A-B FADE

IN value sets the point along the throw of the volume modulator that the modulator’s output

value will begin to rise above zero (i.e. fade in). The A-B FADE TO value sets the point along the

throw of the volume modulator that the modulator’s output value will have risen to its maximum

output. The C-D FADE OUT value sets the point along the throw of the volume modulator that

the modulator’s output value will begin to fall from maximum (i.e. fade out). The C-D FADE TO

value sets the point along the throw of the volume modulator that the modulator’s output value

will have fallen to zero.

The default values are “A-B FADE IN=0 TO 127” and “C-D FADE OUT=127 TO 127,” imposing

the following shape on the output of the volume modulator. In this example the Mod Wheel is

the volume modulator:

0 127

BCD

zero output

max output

modulator throw

wheel down wheel up

To reverse the polarity of the volume modulator, set the values as follows:

“A-B FADE IN=0 TO 0” and “C-D FADE OUT=0 TO 127.” The shape imposed on the output of

the volume modulation is as follows; again, the Mod Wheel is the volume modulator:

modulator throw

wheel down wheel up

127

zero output

max output

Note: Whenever you cross fade between WaveSamples, the WaveSamples must be in different layers,

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 358