ENSONIQ TS-10 Specifications download pdf (Page 68)

Section 4 — Understanding Presets TS-10 Musician’s Manual

• Press the lower center soft button so that the cursor (underline) is beneath the FULL-BODY

MIX value (090). The display should look like this:

• Press the Replace Track Sound button. Its LED should be lit.

• Press the Up Arrow button. The display now shows:

• BRITE-PNO is underlined because it is the next Program that has the same Program Type as

FULL-BODY.

• Press the Up Arrow button again. Notice that SoundFinder has moved from BRITE-PNO to

the STEREO-PNO Program. STEREO-PNO is also defined with the same Program Type as

FULL-BODY.

• Continued presses of the Up Arrow will scroll forward through all of the Programs with the

same Program Type. Continued presses of the Down Arrow button will scroll backward

through all of the Programs with the same Program Type.

• When you’ve found the sound that you want, press the Replace Track Sound button to exit

SoundFinder. The Replace Track Sound LED will no longer be lit, and you will be returned

to the MIX page with the last sound selected replacing FULL-BODY.

Replacing a Sound and the Effect in a Preset

You can replace the sound on a track and make its effect become the preset’s effect by double-

clicking the Replace Track Sound button:

• Select a preset and select the track whose sound you want to replace.

• Double-click Replace Track Sound. The last selected sound bank page will be displayed and

the LEDs above the Replace Track Sound and the Sounds button will both start to flash,

indicating that you are in Replace Track Sound mode.

• Use the BankSet, Bank buttons, and soft buttons to pick a sound as before; but now each time

you pick a new sound, its effect will become the preset effect.

• Press Replace Track Sound again to exit Replace Track Sound mode and return to the preset

page to verify that your change was correct.

Display Location

The following short cut for finding the locations of the sounds assigned to each Preset Track also

shows the Display Location for each Program. For any Program or Preset Bank, the Display

Locations are numbered as follows:

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 68