ENSONIQ TS-10 Specifications download pdf (Page 52)

TS-12 Musician’s Manual Section 2 — System Page Parameters

Using the U1-Programs Pitch-Tables

Note: You will need the TSD-100 floppy disk that was included with the TS-10 to complete the

following exercise. This disk contains two files of pitch-tables. They are stored as 60-

PROGRAMS file types. The first pitch-table file is called HIST PTABLS and contains five

different Historical pitch-tables with twelve root key versions of each scale. The second file is

called ETH/MOD PTS and contains a variety of Ethnic and Modern pitch-tables:

• Insert the TSD-100 floppy disk into the disk drive and press the Storage button twice.

Tip: Pressing the Storage button twice will automatically take you to the Disk Load Page.

• Press the Up or Down Arrow button until the display reads TYPE=

60-PROGRAMS

• Press the upper left soft button above the words LOAD FILE=__________. Using the Up or

Down Arrow button, find the file named

ETH/MOD PTS

• Press the bottom middle soft button beneath the words BANKSET U0, and press the Up

Arrow button once so the display reads BANKSET U1.

• Press the upper right soft button above the word *YES*. This will load 60 new pitch-table

Programs into User RAM BankSet 1.

When the file has been loaded, the display will show DISK COMMAND COMPLETED.

• Press the System button four times until the display reads SYSTEM PITCH-TABLE=

<last

selected pitch-table>

. Press the Up or Down Arrow button to set this value to PITCH-

TABLE=

U1-PROGRAMS.

• Press the Sounds button and select a sound of your choice from any BankSet other than

BankSet U1.

• While holding down the BankSet button, press the Bank 1 button, then release both buttons.

You have now selected User RAM BankSet U1.

Note: At this point when you select locations in BankSet U1, you will be selecting from 60 pitch-tables

instead of 60 Programs. The Programs that were originally stored in BankSet U1 have been

replaced by the newly loaded pitch-table file.

• Press the Bank 0 button and then press the upper left soft button. Play the keyboard. This

selects the first of the 60 pitch-tables that are instantaneously available.

Try the other pitch-tables in Bank 0 by pressing the other soft buttons. Continue by selecting

pitch-tables in Banks 1 through 9. Each Bank contains six pitch-tables.

Using the above procedure, you can load the file named HIST PTABLS to try more pitch-tables.

Loading a full set of 60 pitch-tables into the TS-10 internal memory in this way gives you the

ability to select a variety of keyboard tunings in real-time while in the middle of a performance!

Pitch-tables can even be remotely selected via incoming MIDI Program Changes.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 52