ENSONIQ TS-10 Specifications download pdf (Page 83)

TS-10 Musician’s Manual Section 5 — Preset/Track Parameters

• Press the Performance Options button again to get to the Pedal page:

Pedal Page Range: (described below)

The Pedal parameter disables (when OFF) or controls the polarity of the CV•Pedal, when

PEDAL=VOL on the SYSTEM page. Inverted polarity can be used to crossfade between layered

tracks with the volume pedal.

• Press the Track/MIDI button to get to the MIDI Status page:

MIDI Status Page Range: (described below)

This page determines the MIDI Status of a track (i.e. whether it will play locally, only over MIDI,

or both). The six possible settings are:

SEND/RECV Keys, controllers, etc., will play locally and will be sent via MIDI over a selected MIDI

channel. Incoming MIDI will play internal voices. This is the default setting for Presets.

SEND/---- Similar to SEND/RECV, keys, controllers, etc., will play locally and will be sent via MIDI

over a selected MIDI channel. However, incoming MIDI will not play internal voices.

----/RECV The track will only play internal voices, and will not send any data out MIDI. Incoming

MIDI will play internal voices. This is the default setting for sequencer tracks.

MIDI-OFF The track will only play internal voices, and will not send any data out MIDI. Incoming

MIDI will not play internal voices.

VOICE-OFF Keys, controllers, etc., will be sent out via MIDI when the track is played from the

keyboard. However, keys played on the local keyboard will not play TS-10 voices at all.

Incoming MIDI and sequencer playback will not play internal voices. This is useful

when using the TS-10 as a controller with an external sequencer and a number of other

remote MIDI devices. It is also good for turning off certain tracks when using the TS-10

as a multi-timbral receiver in MULTI Mode, thereby limiting the number of channels to

which the TS-10 will respond.

LOCAL-OFF Keys, controllers, etc., will be sent out via MIDI when the track is played from the

keyboard. However, keys played on the local keyboard will not play TS-10 voices at all.

Incoming MIDI and sequencer playback will play TS-10 voices. Use this status when

you want to create MIDI-only tracks for sequencing or playing remote MIDI devices.

MIDI-LOOP This track STATUS is optimized for use in a MIDI loop. It functions just like LOCAL-

OFF, except that the sequencer will not play local voices. This ensures that sounds will

not play twice (once locally and again via incoming MIDI) when sequencing in a MIDI

loop. See Section 10 — Understanding the Sequencer for information about recording

into the sequencer in a MIDI loop.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 371 372

No comments

ENSONIQ TS-10 Specifications Page 83